Angelwax Enigma Legacy Wheel & Caliper Coating

Formulated to be easy to use, Enigma Legacy Wheel & Caliper is a consumer grade wheel and caliper coating designed specifically for alloy wheels and brake calipers which can be applied by the professional and enthusiast detailer alike within minutes, without the need for an infra red curing lamp.

Angelwax ENIGMA LEGACY WHEEL & CALIPER is an easy-to-use titanium ceramic coating designed specifically for alloy wheels and brake calipers. Formulated with ease of use in mind, ENIGMA LEGACY WHEEL & CALIPER can be applied by both the professional detailer and detailing enthusiast alike and is a fabulous wheel and caliper coating that can be applied in minutes.

Unlike regular ceramic coatings, ENIGMA LEGACY WHEEL & CALIPER does not need to cure using infra-red lighting. Once applied, ENIGMA LEGACY WHEEL & CALIPER will protect the surface from harmful fallout and contamination thus making cleaning and maintenance much easier.

Directions:  Clean each wheel and caliper using BILBERRY WHEEL CLEANER or REVELATION thoroughly and suitably prepare the surface removing ALL contamination. For best results, before application, polish the wheels and calipers to a high gloss finish using either REDEMPTION or PERFECT POLISH.  Always apply ceramic products in a sheltered environment.

Remove the cap on the bottle and apply a few drops of ENIGMA LEGACY WHEEL & CALIPER onto a microfibre applicator or a suede applicator cloth which is used in conjunction with the Angelwax foam block. Apply the coating to one wheel/caliper at a time. Once the wheel/caliper has been coated, allow the coating to cure to the wheel/caliper surface for 2 minutes before removing the residue with a clean, dry, microfibre cloth. Once this has been completed, use a buffing towel to create a high gloss finish.

The curing time of two minutes is dependent on a temperature of approximately 20°c/68°f.

TIP: Apply Angelwax Enigma Legacy Wheel & Calliper Coating in sections. It is fast drying and curing formula, so large, complexly shaped rims should be divided in numerous, smaller sections.

Size: 30 ml

SPECIFICATION

CONSUMPTION: 15ml/car
TEMPERATURE RESISTANCE: >800’C
PH TOLERANCE: 2-11
THICKNESS: 0,5qm
DURABILITY: >24 MONTHS / 30K KM

MADE IN SCOTLAND