Showing 1–16 of 22 resultsSorted by popularity
How to Choose a Car Clay Bar and Clay Lube
A car clay bar lifts bonded contamination that washing leaves behind, so paint feels smooth before polishing, waxing or coating. Clay always needs a slick lubricant, and heavy iron or tar deposits are easier to remove with chemicals first.
Traditional clay bars
A bar gives good feel on paint and glass. GYEON Q²M Clay is a mid-strength bar that GYEON says is chemical resistant, so it can be used together with Q²M Iron. Fold the bar to a clean face often and discard it if dropped.
Clay mitts and towels
For faster work on larger cars, a polymer clay surface is quicker to use. The WORK STUFF Clay Mitt removes brake dust, metallic particles and tree sap from paintwork and glass, and can be rinsed and reused.
Clay lube and chemical decontamination
Use plenty of lubricant so the clay glides instead of dragging. GreenZ Clay Lube adds slickness to reduce the risk of marring. Before claying, GYEON Q²M Iron dissolves ferrous deposits like brake and rail dust, and GYEON Q²M Tar removes tar spots safely from paint, glass and trim.
For the full order of steps, read this decontamination routine before claying and coating.
Frequently asked questions
How do I know if my car needs claying?
After washing, run your fingertips lightly over the paint inside a thin plastic bag. If it feels rough or gritty, bonded contamination is present and clay will help.
Can I use water instead of clay lube?
Plain water gives little slickness and raises the chance of marring. A dedicated clay lube keeps the clay gliding and lifts residue away from the surface.
Should I polish or wax after claying?
Yes. Claying leaves the paint bare and can cause light marring on soft paint, so follow with a polish if needed and then a wax, sealant or coating.
























