GreenZ Mineral Deposit Remover (MDR)
₹ 3,133
(Inclusive of all taxes)
GreenZ Mineral Deposit Remover is designed for professional use and helps car detailers to fight against their daily facing challenges of logo cleaning and the water-spot removal.
Water-spot removal is one of the nightmare of a detailer and GreenZ Mineral Deposit Remover is a perfect solution for water-spot issues and cleaning the mineral deposits from the logos.
In stock
At a glance
Best for: Professional detailers dealing with water spots on glass and other automotive surfaces, or mineral deposits on logos.
- Non-abrasive, acid-based cleaner that dissolves water-based contaminants without polishing or abrading.
- Made for professional use against water spots and mineral deposits on logos.
- Wipe it onto glass or other automotive surfaces to dissolve and remove minerals.
- The maker says the acids and cleaning agents work without affecting or removing paint.
- Wash the surface afterwards to remove chemical residue.
GreenZ Mineral Deposit Remover is designed for professional use and helps car detailers to fight against their daily facing challenges of logo cleaning and the water-spot removal.
Water-spot removal is one of the nightmare of a detailer and GreenZ Mineral Deposit Remover is a perfect solution for water-spot issues and cleaning the mineral deposits from the logos. It is a non-abrasive acid-based chemical cleaner that will dissolve and remove water based contaminants without the need to polish or abrade the surface. Simply wipe GreenZ Mineral Deposit Remover on glasses or other automotive surfaces to dissolve and remove minerals.
A combination of acids and cleaning agents will break down and dissolve these contaminants and make the surface clean and smooth again without affecting or removing paint!
HOW TO USE
- Damp the glass surface with water.
- Pour a little GreenZ MDR on a microfibre towel and wipe over the water stains.
- Wipe on the surface and work it in for 5 – 10 seconds.
- Wipe off the residue and check to see if the surface is clean and free of mineral deposits.
- Repeat the above steps as required to remove any remaining contaminants.
- Wash the surface to remove any remaining chemical residue.
Frequently asked questions
How do I use Mineral Deposit Remover on glass?
Damp the glass with water, pour a little onto a microfibre towel, wipe over the stains and work it in for 5 – 10 seconds. Wipe off the residue and repeat if needed.
Will it damage paint?
No. The acids and cleaning agents clean the surface without affecting or removing paint, and there is no need to polish or abrade.
Do I need to wash after using it?
Yes. Wash the surface afterwards to remove any remaining chemical residue.
Imported By: GNZ CARCARE PRIVATE LIMITED, 21, Baglur Road, Hosur, Tamil Nadu
3 reviews for GreenZ Mineral Deposit Remover (MDR)
5.00 out of 5 stars
Only logged in customers who have purchased this product may write a review.
Shipping
- Shipped within 2-3 working days
- Please check our Shipping Policy
You may also like…
-
₹ 6,449
Related products
-
Price range: ₹ 2,708 through ₹ 8,213
-
₹ 998
-
₹ 2,598
Seoul Car Care Pvt Ltd –
MDR has solved a recurring problem at our studio — customers bringing in cars with heavy water spot etching, especially lighter paint colours with white mineral deposits from hard water areas in Kerala. The MDR removes them cleanly without needing to compound the area first in most cases. Apply with a foam applicator, work lightly, wipe off and the deposits are gone. Even dealt with some older heat-cured water spot etching that we expected to need polishing — the MDR cleared around 70 percent of them on the first pass alone. Very useful as part of our monsoon prep detailing packages. Does not leave any staining or hazing on the clear coat surface and is safe to use near plastic trim when applied with care. A genuine problem-solving product.
Seoul Car Care Pvt Ltd –
MDR has solved a recurring problem at our studio — customers bringing in cars with heavy water spot etching, especially lighter paint colours with white mineral deposits from hard water areas in Kerala. The MDR removes them cleanly without needing to compound the area first in most cases. Apply with a foam applicator, work lightly, wipe off and the deposits are gone. Even dealt with some older heat-cured water spot etching that we expected to need polishing — the MDR cleared around 70 percent of them on the first pass alone. Very useful as part of our monsoon prep detailing packages. Does not leave any staining or hazing on the clear coat surface and is safe to use near plastic trim when applied with care. A genuine problem-solving product.