Nanolex Si3D BC Ceramic Coating

Nanolex Si3D BC is an extremely dense coating based on inorganic Polysilazane technology, providing outstanding hardness, a non-porous surface that is extremely easy to clean as well as resistant to chemicals.

The semi – hydrophobic coating layer incorporates all benefits that come along with todays glass coatings while topping their performance and durability by its key feature, the flexibility.

The coating is suitable for layering and achieves outstanding finishes.

The used carriers for the glass and ceramic precursors are safe, non aggressive, slow evaporating solvents, guaranteeing compatibility to freshly painted cars and sensitive paints as well as a very easy, unproblematic application of the product.

Very hard and scratch resistant, flexible coating permanent bonding to the surface trouble free application Highly compatible with Si3D and Si3D HD as a top coat

Nanolex Si3D BC was developed, tested and produced in Germany.

Features & Benefits:

• Thick layer for maximum protection
• Easy to clean effect
• Maximum Hydrophobicity
• High gloss finish

How to use

 Processing temperature: 5-30°C – Avoid direct sunlight and/or high air humidity.

1. Nanolex Si3D BC can be applied directly to all clear-coated (lacquered) surfaces. The lacquer surface must be dry and free of any contamination or dust. We strongly recommend to use Nanolex EX directly before the application to make sure that all oils/fillers and other dirt are removed completely from the surface. Use Nanolex microfiber towels and turn or exchange cloth frequently during cleaning/polishing.
2. If the car was machine polished before the application it is absolutely necessary to remove any (mostly invisible) fillers and oils – if those are not removed a white or grey hazing will appear on the paint once Si3D BC was applied. The paint sealant layer itself is too thin to be visible and can easily buffed off – only fillers and oils will become visible. We recommend to wash the car with Nanolex PreWash after the paint was machine polished to safely remove the majority of the contamination.
3. Spread 5-10 drops/m2 of Nanolex Si3D BC on a microfiber applicator pad and apply it sparingly by rubbing in with light pressure in criss-cross motions. Remove the coating residue with a soft microfiber cloth after a maximum of 3 minutes. There is no pressure necessary to remove it completely.
4. Let Nanolex Si3D BC cure on the surface for at least 12 hours (at ambient temperature, assuming 20°C) before the first water contact. Do not wash the car within the first 72 hours.

Curing time depending on temperature: @50°C: 3-4 hours @80°C: 2 hours
 

1