Nanolex Si3D HD Ceramic Coating

Brand: Nanolex

 6,478 9,456

Nanolex Si3D HD was designed, and is available, for professional customers looking for a higher grade Nanolex Si3D coating with an even higher durability, performance and hardness.

Secure Payment Link - Car Detailing Products

Nanolex Si3D HD was designed, and is available, for professional customers looking for a higher grade Nanolex Si3D coating with an even higher durability, performance and hardness.

The three-dimensional matrix forms a highly chemical and abrasion resistant layer that is highly hydrophobic at the same time.

Due to the high layer thickness the depth of color is taken to the maximum as well.

Si3D HD is formulated VOC-free using sophisticated state of the art carriers.

Si3D HD is developed, tested and product in Germany.

Features & Benefits:

  • Thick layer for maximum protection
  • Easy to clean effect
  • Maximum Hydrophobicity
  • High gloss finish

How to use

Processing temperature: 5-30°C – Avoid direct sunlight and/or high air humidity.

  1. Nanolex Si3D MAX can be applied directly to all clear-coated (lacquered) surfaces. The lacquer surface must be dry and free of any contamination or dust. We strongly recommend to use Nanolex EX directly before the application to make sure that all oils/fillers and other dirt are removed completely from the surface. Use Nanolex microfiber towels and turn or exchange cloth frequently during cleaning/polishing.
  2. If the car was machine polished before the application it is absolutely necessary to remove any (mostly invisible) fillers and oils – if those are not removed a white or grey hazing will appear on the paint once Si3D MAX was applied. The paint sealant layer itself is too thin to be visible and can easily buffed off – only fillers and oils will become visible. We recommend to wash the car with Nanolex PreWash after the paint was machine polished to safely remove the majority of the contamination.
  3. Spread 5-10 drops/m2 of Nanolex Si3D MAX on a microfiber applicator pad and apply it sparingly by rubbing in with light pressure in criss-cross motions. Remove the coating residue with a soft microfiber cloth after a maximum of 3 minutes. There is no pressure necessary to remove it completely.
  4. Let Nanolex Si3D MAX cure on the surface for at least 12 hours (at ambient temperature, assuming 20°C) before the first water contact. Do not wash the car within the first 72 hours.

Curing time depending on temperature: @50°C: 3-4 hours @80°C: 2 hours


Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may write a review.

Shipping

You may also like…

  •  610 5,007
  • Cancoat-Pro-Professional-Spray-Ceramic-Coating