BLACKFIRE Paint Sealant
₹ 4,315 – ₹ 7,079
BLACKFIRE Paint Sealant is a sophisticated oil-in-water emulsion is safe for all finishes, with or without a clear coat. This emulsion contains a small amount of a very refined mineral spirit in a water base. Multiple coats can be layered to deepen the gloss without drying or weakening the paint.
BLACKFIRE Paint Sealant is a sophisticated oil-in-water emulsion is safe for all finishes, with or without a clear coat. This emulsion contains a small amount of a very refined mineral spirit in a water base. Multiple coats can be layered to deepen the gloss without drying or weakening the paint. BLACKFIRE Paint Sealant can be applied by hand or dual action polisher. It applies easily and buffs off uniformly even in climates of high heat and high humidity. You simply walk around your car wiping on and buffing off as you go. Nearly effortless. BLACKFIRE Paint Sealant can be used by itself as a final sealant or as the foundation of BLACKFIRE’s signature Wet Ice Over Fire shine.
- Creates a deep gloss that shimmers like water.
- Colors radiate with depth and clarity.
- Highly resistant to UV and infrared radiation.
- Safe for all painted finishes.
HOW TO USE
Hand Application: Always use on a cool surface out of direct sunlight. Apply a quarter size amount of product on a dry applicator pad and wipe on the surface using small, circular motions. Allow Wet Diamond All Finish Paint Protection to dry before buffing. Buff haze with a clean GreenZ All-purpose Towel.
Machine Application: Apply BLACKFIRE Wet Diamond All Finish Paint Protection using a finishing pad or wax pad on an orbital polisher, such as the FLEX XC 3401 VRG Orbital Polisher. Work on a small area, about 24 to 24 inches square, out of direct sunlight. Apply two 6 to 8-inch lines of All Finish Paint Protection directly onto the surface. With the machine off, spread the sealant over the surface using the dry foam pad. This coats the foam pad and the paint with sealant. Place the pad on the paint and turn the machine on. Set the speed dial on the polisher between 3 and 4. Work the pad over the surface in a back-and-forth motion and then an up-and-down motion. Apply until the sealant starts to dry. Cover one section of the vehicle at a time (i.e. the hood, a door, fender, etc.). Allow a haze to form. Hand buff to a brilliant shine with a GreenZ All-purpose Microfiber Towel.
Only logged in customers who have purchased this product may write a review.