Collinite SLICKR 3 IN 1 Detailer 150

Collinite SLICKR 3 IN 1 Detailer 150 quickly and easily adds hydrophobic water beading properties + a high gloss, hyper-slick finish to a variety of automotive exterior surfaces. With an SiO2-polymer structure, Slickr excels as both a stand-alone protectant or as a booster applied over any existing wax, sealant or ceramic/graphene coating; enhancing shine & adding protection. Its versatility enables it to also be used as a drying aid, topper, clay lubricant or as a final inspection detailer; removing light dust and smudges. Safe for paint, glass, wheels & trim.

Available in 16 fl oz
Average Spread/Coverage: 600-1,000 sq ft

TIPS: Always test product first in a small, inconspicuous area to ensure desired result.

As a lubricating drying aid: Following a wash-while vehicle surface is still wet-apply 2 sprays of Slickr to one 3×3 ft panel at a time. Using GreenZ Finisher Edgeless Microfiber Towel, wipe entirety of panel until dry. Flip towel as necessary, and change towels as they become saturated. Repeat process on all painted surfaces (and glass).

As a clay lubricant: Apply 2 sprays of Slickr directly onto a Colli-Flex Decon Towel (rubberized side). With minimal pressure, move decon towel over a 3×3 ft panel in a cross-hatch, overlapping pattern. *Apply additional product to the surface in order to maintain slickness/lubrication and to avoid marring. Remove product from panel with a dry GreenZ Finisher Edgeless Microfiber Towel. Repeat process on all painted surfaces (and glass).